Stone masonry in Waco TX - walls and mortar joints that fit the stone you have
Crumbling mortar, loose stones or a stone wall you keep putting off? We build and repair stone so it holds and looks like it belongs.
Stone masonry for new walls and worn jointsfor Waco homes and yards
Most calls we get for stone masonry in Waco, TX, start one of two ways. The mortar between your stones is crumbling or washing out, or you want a new stone wall and you've been putting it off. We handle both, and when the wall is brick, that's our brick pointing work instead.
We start by asking if you want a dry stacked wall, just stones fitted with no mortar, or a mortared one, since that changes what goes underneath. If a wall is cracking because what's under it has shifted, new mortar won't fix it, so we look at foundation repair first.
Price comes down to the wall. Dry stacked or mortared on a footing, its height and length, the stone you pick, how much old mortar has to come out and how easy it is to reach all move the number. Timing turns on stone delivery, any permit and dry weather for the mortar, and my written estimate gives you your own figure.
You'll get a straight read on your stone and a wall built to suit it, so call (254) 327-1950.
Stone masonry we build and repair
Every stone job is one of two things, a new wall going up or an old wall that needs its joints redone. We match the method to the stone, the yard and the house.
Dry stacked stone walls
Each stone is fitted against the next, so there are no joints to wear out. We dig out and pack a firm base so the first course sits level.
Mortared stone walls
Stone is set in mortar on a concrete footing we pour first, so digging and concrete are part of the job. You get a tighter, more finished face.
Joint repair on older stone
We rake out mortar that's crumbling or gone and pack fresh mortar into the joints, matched in color and texture so the repair blends into the wall.
Why Waco homeowners call usfor stone, brick and mortar work
I spent years on the line in restaurant kitchens, where a plate that goes out wrong comes right back. I bring that same habit to stone and get it right the first time.
I look at every job myself
I come out to see your wall, ask what you want and write the estimate. Then I run the work on site alongside our crew of masons and helpers.
In business since 2021
I learned masonry working under a local mason before starting this business. Five years in, worn joints, leaky chimneys and put-off yard projects are most of our calls.
Licensed and insured before we start
We're licensed and fully insured. Ask about it when I come out for the estimate, and you'll know where things stand before any work begins.
We'll say when it doesn't need work
If your joints are still sound or a crack is only on the surface, I'll tell you. I'd rather lose the job than sell you work your wall doesn't need.
Walls that look like they belong
We pick the stone and the joint work to suit your house and yard, so a new wall looks like it was always there. Your satisfaction, guaranteed.
Get a stone and mortar estimatefrom the mason who runs the job
Send photos of the wall, its rough size and whether it's a landmark or in a historic district, and we'll reply within one business day. I'll come out for a free written estimate at your property, with no obligation.
How a stone job runsfrom your call to the walkthrough
You'll have the work in writing before anything starts, so there's no guessing about what we're doing to your wall or what it costs.
You call or write
Call (254) 327-1950 or send the form with a few photos, and we'll get back to you to set a time for me to come out.
I look at the stone
I check the stone, the joints and what's under the wall, ask what you want and give you a written estimate that spells out the work.
We get ready
Once you say go, we order the stone and mortar, line up any permit the job needs and prep the site, digging out and packing the base for a new wall.
Our masons do the work
The crew lays the stone or rakes out and refills the joints, keeping mortar off the face of the stone as they go so the wall stays clean.
Cleanup and walkthrough
We haul off old mortar, broken stone and empty bags, then walk the finished wall with you so you can point out anything before we leave.
Stone masonry questions
What is repointing a stone wall?
Repointing means raking out the worn mortar from the joints of a stone wall and packing in new mortar. Masonry wears most at the joints, so repointing renews the part of the wall that breaks down first, and the stone itself usually stays where it is.
Should I use lime or cement mortar on an old stone house?
On older stone, a high lime mortar is usually the better pick, because it lets moisture pass through more readily than denser cement mortar, and mortar that traps moisture leads to damage in the stones themselves. Federal guidance for historic buildings says new mortar should be no stronger than the stone or the original mortar, which on old buildings is lime based, and a lab can analyze the original if you want a close match. We use a mortar that lets the wall breathe and suits what's already there.
How much does stone veneer cost per square foot?
Stone veneer installation across the US usually costs about $25 to $40 per square foot. That's the going range nationally, not our price, and because it's charged by the square foot, a bigger wall face means a bigger total. Stone walls and repointing are priced job by job, and I'll put yours in writing after I see it.
Do I need a permit for stone masonry work in Waco?
Usually, yes, because the City of Waco requires a permit before you build, alter or renovate a property, and the city's Inspection Services office issues permits for residential construction and remodeling. Rules differ from city to city, so we check with the office for your address before we start, and when a job needs a permit, we pull it and line up the inspections. If your house is a landmark or sits in a historic overlay district, the city's planning office also reviews work against its historic preservation rules and design guidelines, so tell us up front.
How do I clean a limestone wall without damaging it?
Stay away from acidic cleaners, because limestone is sensitive to acid, and skip highly alkaline products too. That's the advice of a conservator who looks after San Antonio's old stone missions. If your wall needs more than a rinse, ask us at the estimate before you try a store-bought cleaner.
What causes water damage in old stone walls?
Rain does most of it, soaking into the wall, splashing onto it and getting drawn back up from the ground. Guidance for San Antonio's stone missions says the best approach is to steer water away before it can get into the walls, so when I look at your wall, I check where the water lands and where it drains.
Call about stone masonry in Wacobefore more mortar washes out
Open joints let rain into the wall, so the sooner I see it, the more original stone and mortar there usually is to keep. Call (254) 327-1950 or send the form for an estimate on your stone masonry.